Short Leafy Slide Set - Green with Gold
You are viewing Short Leafy Slide Set - Green with Gold in Sliders
Share with your Social Network friends.
      linkedin

Short Leafy Slide Set - Green with Gold

Sorry this item is currently out of Stock
Short Leafy Slide Set - Green with Gold

Out of Stock Special Order Item
Item: JS-003-G

Short Leafy Slide Set - Green with Gold This stunning slide and cone set will make quick work of a beautiful necklace project.  It is glazed with a green glaze and highlighted in gold.

This set comes with the new smaller size 2 cones.  There are several sizes available for these components.  See the size comparison photo and the measurements below.  In the photo the blue cones are large, the green cones are small.

It is designed to be used with large cord type necklaces such as kumihimo, viking knit, crochet cords, beaded cords, fibers, multi strands and other large cord choices.  It features a hole at the bottom from which you can hang a crystal, or pendant.  It has a large hole (5/16 inch or  10mm)  It is made from porcelain and is hollow making it very lightweight and easy to wear.

Size: Slide 1 1/4 inches (31mm) Wide 1 7/16 inchs (37mm) Tall Hole 5/16 inch (10mm) Hole in bottom 2.5mm
          Cones 9/16 inch (15mm)width at bottom Height at bottom 3/8 inch (13mm)  Front edge 1 1/4 inches (31mm) tall Hole opening 7/16inch (11mm) by 5/16 (7mm) about 3/4 inch (19mm) deep Hole in top 2mm

Comparasions:
Size 1 large cones Cones 11/16 inch (18mm)width at bottom Height at bottom 1/2 inch (13mm)  Front edge 1 1/2 inchs (38mm) tall Hole opening 9/16inch (14mm) by 3/8 (11mm) about 1 inch (25mm) deep Hole in top 2mm
Size 1 Large Narrow Cones (14mm) width at bottom Height at bottom 12.5mm. front edge 37mm tall Hole opening 10mm X 11mm about 1 inch (25mm) deep Hole in top 2mm
Size 2 small Cones 9/16 inch (15mm)width at bottom Height at bottom 3/8 inch (13mm)  Front edge 1 1/4 inches (31mm) tall Hole opening 7/16inch (11mm) by 5/16 (7mm) about 3/4 inch (19mm) deep Hole in top 2mm
Size 2 Small Narrow Cones 14mm width at bottom.  Height at bottom 10mm.  Front edge 31mm tall. Hole opening 7mm X 9mm about 20mm deep Hole in top 2mm